1,392 Technician Roles jobs in the Philippines

Responsibilities:

• Repair, test and maintain electronic devices and equipment (audio and video equipment, bill counters, barcode printers, radios, steamers, televisions, microwaves, electronic airpot, coffee maker, etc.).
• Troubleshoot defective items with or without warranty.
• Prepare service reports and documents for repaired equipment.
• Coordinate deliveries, returns, and supplier pick-ups.
• Support preventive maintenance and repairs across SM branches.

Qualifications:

• Bachelor's Degree graduate of Electronics or related course (or equivalent experience).
• Skilled in troubleshooting and repair of electronic devices.
• Willing to travel for branch support.
• SM Office Address: Echague - 400 Carlos Palanca St., Brgy. 647, San Miguel, Manila

Job Type: Full-time

Work Location: In person

Qualification Requirements:

Educational Attainment:

-Senior High School Graduate/ Associate Degree/ 2 Years Vocational Graduate

Work Experience:

- At least 2-3 years work experience, related in engineering role

Special Skill/ Ability:

-Familiar with preventive maintenance and troubleshooting of machine

-Can use multi tester and can read schematic diagram

Technical Ability:

-Troubleshooting and repair

-Can use multimeter and soldering tools

-Basic knowledge of computer hardware and software

Job Type: Full-time

Work Location: In person

• Experience in motor rewinding (optional but valuable)
• Soldering and desoldering of small electrical components
• Ability to source replacement parts (brushes, bearings, switches, etc.)
• Familiar with safety procedures when handling electrical tools

Key Responsibilities:

• Diagnose and repair damaged or malfunctioning power tools (grinders, chipping guns, drills, etc.).
• Perform motor rewinding, brush replacement, switch repair, bearing replacement, and general servicing.
• Disassemble and reassemble power tools safely and correctly.
• Conduct preventive maintenance to avoid future breakdowns.
• Maintain proper documentation of repairs, parts replaced, and service logs.
• Ensure all repaired tools are tested and safe to use before release.
• Coordinate with the supervisor regarding tool conditions and inventory.
• Maintain cleanliness and orderliness in the workshop.

Qualifications:

• At least 1–2 years of experience in power tools repair or related field.
• Knowledgeable in basic electrical and mechanical systems of hand tools.
• Can read and interpret basic wiring diagrams or manuals.
• Familiar with brands like Makita, Bosch, DeWalt, Hitachi, etc.
• TESDA NC II in Electrical Installation & Maintenance or equivalent is a plus.
• Able to work with minimal supervision.

Job Types: Full-time, Permanent

Work Location: In person

At least finish 2-3 years of a technical course

Knowledge of electronics or mechanical systems

Or with 6 months of experience in a technical environment

Residing within Makati City, Mandaluyong City, Manila City

Newly graduates are welcome to apply

• Inspect and test product units before release.
• Troubleshoot and repair basic technical issues.
• Assist in product setup and functionality checks.
• Perform routine maintenance and quality control.
• Coordinate with the team for technical support needs.
• Keep records of tests and repairs.

The Repair and Maintenance Technician is responsible for performing general maintenance and repair work, including declogging, plumbing, carpentry, and painting, to ensure that The Moment Group's facilities remain in optimal condition. This role requires hands-on technical skills, problem-solving abilities, and a proactive approach to maintaining a safe and well-functioning environment.

Key Responsibilities:

Declogging & Drain Maintenance

• Perform regular declogging and drainage maintenance to prevent blockages and ensure smooth water flow.
• Inspect, troubleshoot, and resolve plumbing issues related to clogs, leaks, and drainage concerns.

General Plumbing Repairs

• Repair and maintain water lines, pipes, and fixtures to ensure proper functionality.
• Install and replace basic plumbing components as needed.

Carpentry & Fixture Repairs

• Perform basic carpentry work, including repairing doors, cabinets, tables, and other fixtures.
• Assist in the installation of shelves, partitions, and minor construction work.

Painting & Surface Maintenance

• Conduct painting and refinishing work to maintain the aesthetic and quality of facility surfaces.
• Patch and repair walls, ceilings, and other surfaces as necessary.

Preventive Maintenance & Facility Upkeep

• Conduct routine inspections to identify potential issues and perform necessary repairs.
• Ensure that all tools, equipment, and work areas are properly maintained and organized.
• Assist in emergency repair tasks as required.

Qualifications & Skills

• At least 1-3 years of experience in general maintenance, plumbing, carpentry, or painting.
• Strong knowledge of declogging techniques and drain maintenance.
• Basic understanding of electrical, plumbing, and construction repairs.
• Ability to work independently and troubleshoot maintenance issues effectively.
• Strong attention to detail and commitment to safety standards.
• Physically fit and capable of handling manual labor and repair tasks.

• Provide technical hardware and repairing support to casino sites and individuals.
• Diagnose and repair of malfunction slot machine parts like power supply, LCD monitors, and mainboards.
• Diagnose equipment failures and/or parts problems; perform required repairs; replace bad components if a suitable spare is available, reinstall repaired equipment
• Service and repair different types of machine parts, printers, and bill acceptor.
• Develop and implement improvement for technical issues of machines and equipment.

Job Type: Full-time

Pay: Php20, Php30,000.00 per month

Benefits:

• Health insurance
• Life insurance

Ability to commute/relocate:

• Pasay: Reliably commute or planning to relocate before starting work (Preferred)

Application Question(s):

• Any related license or certification?

Experience:

• technician: 1 year (Preferred)

Language:

• English (Preferred)

Willingness to travel:

• 100% (Preferred)

Work Location: In person

Job Description:

Repair and refurbishment of ATM parts and peripherals.

Qualifications:

• At least finish 2-3 years of a technical course
• Knowledge of electronics or mechanical systems
• Or with 6 months of experience in a technical environment
• Residing within Makati City, Mandaluyong City, Manila City
• Newly graduated are welcome to apply
• Experience in diagnosing and resolving technical issues relevant certification or a 2-year course in electronics or the mechanical field

Job Type: Full-time

Pay: Php16, Php18,000.00 per month

Application Question(s):

• Are you willing to deploy at Rufino Pacific Towers, 6784 Ayala Avenue 1226 Makati City?
• Are you willing to start ASAP?

Education:

• Bachelor's (Preferred)

Experience:

• Repair Technician: 1 year (Preferred)

Work Location: In person

URGENT HIRING FOR CAMERA SERVICE TECHNICIAN

Location: Yague St., Brgy. Sta. Cruz, Makati City

QUALIFICATIONS:

• Must possess a Bachelor's degree in Engineering (Electrical; Electronics; Electro Mechanical or Mechatronic) or at least a Vocational Diploma, Short course Certificate in any of Engineering field mentioned
• Preferably with 6months and up experience in the required field above
• Required Skills: Troubleshooting; Repair; Demonstration/Presentation and Good communication skills.

JOB DESCRIPTION:

• Perform installations, repairs, and maintenance of equipment or machinery Perform installations, repairs, and maintenance of equipment or machinery
• Conduct routine inspections and preventative maintenance to ensure equipment reliability
• Respond to service calls and troubleshoot problems on-site or remotely
• Communicate effectively with customers to explain technical issues and solutions
• Document service activities, including repairs and parts used
• Document service activities, including repairs and parts used

Job Type: Full-time

Pay: Php20, Php25,000.00 per month

Benefits:

• Paid training

Work Location: In person