What Jobs are available for Repair in the Philippines?

Responsibilities:

• Repair, test and maintain electronic devices and equipment (audio and video equipment, bill counters, barcode printers, radios, steamers, televisions, microwaves, electronic airpot, coffee maker, etc.).
• Troubleshoot defective items with or without warranty.
• Prepare service reports and documents for repaired equipment.
• Coordinate deliveries, returns, and supplier pick-ups.
• Support preventive maintenance and repairs across SM branches.

Qualifications:

• Bachelor's Degree graduate of Electronics or related course (or equivalent experience).
• Skilled in troubleshooting and repair of electronic devices.
• Willing to travel for branch support.
• SM Office Address: Echague - 400 Carlos Palanca St., Brgy. 647, San Miguel, Manila

Job Type: Full-time

Work Location: In person

The Fabrication Technician is responsible for performing general maintenance and repair work, including declogging, plumbing, carpentry, and painting, to ensure that The Moment Group's facilities remain in optimal condition. This role requires hands-on technical skills, problem-solving abilities, and a proactive approach to maintaining a safe and well-functioning environment.

Key Responsibilities

Declogging & Drain Maintenance

• Perform regular declogging and drainage maintenance to prevent blockages and ensure smooth water flow.
• Inspect, troubleshoot, and resolve plumbing issues related to clogs, leaks, and drainage concerns.

General Plumbing Repairs

• Repair and maintain water lines, pipes, and fixtures to ensure proper functionality.
• Install and replace basic plumbing components as needed.

Carpentry & Fixture Repairs

• Perform basic carpentry work, including repairing doors, cabinets, tables, and other fixtures.
• Assist in the installation of shelves, partitions, and minor construction work.

Painting & Surface Maintenance

• Conduct painting and refinishing work to maintain the aesthetic and quality of facility surfaces.
• Patch and repair walls, ceilings, and other surfaces as necessary.

Preventive Maintenance & Facility Upkeep

• Conduct routine inspections to identify potential issues and perform necessary repairs.
• Ensure that all tools, equipment, and work areas are properly maintained and organized.
• Assist in emergency repair tasks as required.

Qualifications & Skills

• At least 1-3 years of experience in general maintenance, plumbing, carpentry, or painting.
• Strong knowledge of declogging techniques and drain maintenance.
• Basic understanding of electrical, plumbing, and construction repairs.
• Ability to work independently and troubleshoot maintenance issues effectively.
• Strong attention to detail and commitment to safety standards.
• Physically fit and capable of handling manual labor and repair tasks.

Job Type: Full-time

Pay: Php18, Php20,000.00 per month

Benefits:

• Company events
• Employee discount
• Opportunities for promotion
• Paid training
• Promotion to permanent employee
• Staff meals provided

Work Location: In person

• Inspect and test product units before release.
• Troubleshoot and repair basic technical issues.
• Assist in product setup and functionality checks.
• Perform routine maintenance and quality control.
• Coordinate with the team for technical support needs.
• Keep records of tests and repairs.

• Experience in motor rewinding (optional but valuable)
• Soldering and desoldering of small electrical components
• Ability to source replacement parts (brushes, bearings, switches, etc.)
• Familiar with safety procedures when handling electrical tools

Key Responsibilities:

• Diagnose and repair damaged or malfunctioning power tools (grinders, chipping guns, drills, etc.).
• Perform motor rewinding, brush replacement, switch repair, bearing replacement, and general servicing.
• Disassemble and reassemble power tools safely and correctly.
• Conduct preventive maintenance to avoid future breakdowns.
• Maintain proper documentation of repairs, parts replaced, and service logs.
• Ensure all repaired tools are tested and safe to use before release.
• Coordinate with the supervisor regarding tool conditions and inventory.
• Maintain cleanliness and orderliness in the workshop.

Qualifications:

• At least 1–2 years of experience in power tools repair or related field.
• Knowledgeable in basic electrical and mechanical systems of hand tools.
• Can read and interpret basic wiring diagrams or manuals.
• Familiar with brands like Makita, Bosch, DeWalt, Hitachi, etc.
• TESDA NC II in Electrical Installation & Maintenance or equivalent is a plus.
• Able to work with minimal supervision.

Job Types: Full-time, Permanent

Work Location: In person

Job Title: Power Tools Technician

Location: San Nicolas St. Binondo, Manila

Salary: P18,000-P21,000

Job Description:

Handle quality inspection, testing, and repair of the following:

• Repair/Check defective and/or malfunctioning units as needed
• Items from the warehouse prior to delivery or release to clients
• Running tests and interpreting results to make effective recommendations
• Writing up reports, safety regulations, and preventative maintenance plans
• Sourcing replacement parts, if needed.
• Repairing or replacing faulty equipment
• Keeping abreast of advancements in your field and attending workshops as required
• Other duties are assigned

Qualifications:

• Candidate must be possessing at least a Vocational Course in Electronics and Management Systems or equivalent
• At least 2 years of working experience
• Excellent organizational and time management skills
• With the initiative, keenness on details, and proactive
• Willing to Render OT when needed

Job Types: Full-time, Fixed term

Contract length: 6 months

Pay: Php18, Php21,000.00 per month

Benefits:

• Opportunities for promotion

Work Location: In person

JOB DESCRIPTION:

1. TECHNICAL ASSESSMENT/EVALUATION, RECOMMENDATION, DOCUMENTATION & REPORTING. Provide timely, thorough, and accurate assessment/evaluation of the units. Provide the most feasible recommendation. Document and report the same.

2. PRODUCT REPAIRS. Repair units best, ensuring quality work that is done fast and efficiently with as little rework as possible.

3. ASSIST CUSTOMERS (INTERNAL AND EXTERNAL) WITH TECHNICAL CONCERNS. Provide all technical assistance to product users, customers, etc. in a professional way that will continue to build trust and confidence in our brands.

4. PROPERTY SAFEKEEPING. All items under custody should be properly handled and safely kept to ensure everything is complete, well accounted for, in good order, and protected from any possibility of theft or damage.

5. Other tasks may from time to time be assigned in accordance with the exigencies of the business, within the employee's department, within the company, as well as other companies within The WOW Group within the scope of this Job Description.

Job Type: Full-time

Pay: Up to Php20,000.00 per month

Application Question(s):

• Do you have TESDA Certificate in Consumer Electronics Servicing NC II, III, or Electronics Products Assembly and Servicing NC II?
• Are you willing to work at EDSA Balintawak, Quezon City?
• Do you have working experience in using and repairing kitchen appliances,

coffee, or Espresso machines, and 1 year in repairing audio-video equipment?

Experience:

• Repair Technician: 1 year (Preferred)

Work Location: In person