1,459 Qa Technician jobs in the Philippines
QA Technician
Posted today
Job Viewed
Job Description
Key Responsibilities:
Calibration:
- Perform routine calibration of instruments and devices
- Audit and support maintenance teams in production areas
- Maintain calibration records and prepare audit documentation
- Inspect, test, and troubleshoot instruments for accuracy and compliance
ESD (Electrostatic Discharge):
- Maintain inventory of calibration/ESD tools and standards
- Implement and enforce ESD safety protocols (e.g., grounding)
- Ensure use of ESD-safe materials and prevent electrostatic discharge
- Keep records and conduct audits/training per ANSI/ESD S20.20 standards
Education:
- BS Degree in Engineering (minimum requirement)
qa technician
Posted today
Job Viewed
Job Description
- Execution of quality inspections using proper equipment and techniques
- Maintenance and checking of Inspection Machines, Tools and Equipment used.
- Checking of parameters defined for monitoring.
- Monitor production processing via random QA audits and sampling
- Assist with problem solving – root cause analysis – corrective actions
- Maintain accurate documentation of quality inspection results
- Ensure outgoing products follow required specifications
- Ensure production personnel are following proper procedure for ongoing production checks
- Assist with training and instruction for production operators in QA measuring procedures
- Development and maintenance of quality procedures and work instructions
- Audit and maintenance of compliance to required quality management system standards
- Provision of detailed quality reports as required – daily, weekly, monthly, etc.
- Assistance in document control management
- Other duties as required by quality management
qa technician
Posted today
Job Viewed
Job Description
- Vocational Graduate / College Level
- Preferably with work experience in a manufacturing company
- Document checking and maintenance
- QC Patrol (Shift B) Training and certification, Operator's work compliance, document accuracy, support customer process audit, maintain UL requirements, Monitor C/A implementation
QA Technician
Posted today
Job Viewed
Job Description
Basic Requirements
Preferably vocational course, undergraduate of technical course or at least high school graduate with 1 year relevant experienced.
Possess high level of comprehension, resourcefulness and willingness to learn.
Must be punctual, have sense of responsibility and initiative at work
Brief Job Description
Perform machine troubleshooting and preventive maintenance
Perform equipment calibration
Job Type: Full-time
Benefits:
- Additional leave
- Company Christmas gift
- Company events
- Free parking
- Health insurance
- Life insurance
- On-site parking
- Opportunities for promotion
- Paid training
- Pay raise
- Promotion to permanent employee
- Staff meals provided
- Transportation service provided
Work Location: In person
QA Technician
Posted today
Job Viewed
Job Description
· Vocational Graduate / College Level
· Preferably with work experience in a manufacturing company
· Document checking and maintenance
· QC Patrol (Shift B) Training and certification, Operator's work compliance, document accuracy, support customer process audit, maintain UL requirements, Monitor C/A implementation
Job Type: Full-time
Work Location: In person
Application Deadline: 09/01/2025
Expected Start Date: 09/08/2025
In-Process QA Technician
Posted today
Job Viewed
Job Description
Raw Material Handling & Transfer
Verify raw materials for accuracy (type, lot number, quantity) before transfer from warehouse to intake.
- Conduct visual and sensory checks (odor, color, contamination) to identify quality concerns.
- Inspect transfer equipment (conveyors,elevators,turnheads, bins) for cleanliness and cross- contamination risks.
Ensure raw materials are allocated to correct bins, avoiding product intermixing.
Grinding & Particle Size Control
Monitor hammer mill operation for efficiency and effectiveness.
- Conduct sieve analysis at scheduled intervals to ensure proper particle size distribution (PSD).
Flag early signs of screen wear or mill degradation and coordinate preventive maintenance.
Batching & Mixing Assurance
Audit batching and dosing sequences for all ingredient types (macro, micro, hand-adds).
- Validate hand-adds against batch tickets prior to release for production use.
- Inspect mash for proper formulation, uniformity, and consistency post-mixing.
Monitor and calibrate liquid dosing systems (molasses, oils) for accuracy.
Pellet Mill & Changeover Monitoring
Enforce flush-by-formula, sequencing protocols to prevent cross-product contamination during changeovers.
- Oversee disposal and segregation of start-up or set-off products to avoid contamination.
Conduct and approve testing on first-batch runs.
Moisture content
Pellet temperature
Pellet durability index (PDI)
Sink/float test
Nutrients specs ( c/o QA )
Verify conditioning parameters such as steam temperature and retention time.
In-Process Product Validation
Sample and test intermediate products (mash, pellet, cooled products) prior to bagging.
- Confirm correct product routing from bins to bagging lines using system and physical checks.
Perform in-process checks on:
Moisture
Pellet durability and hardness
Color, texture, and uniformity
Ensure non-conforming products are held and escalated.
Documentation & Communication
Accurately log all checks, tests, and interventions in real time using designated systems or forms.
- Issue immediate "Stop Production" notifications upon detection of critical deviations.
- Facilitate quality-focused shift handovers with production teams.
Participate in Root Cause Analysis (RCA) and Corrective & Preventive Actions (CAPA).
Continuous Improvement
Analyze recurring trends in quality deviations to recommend improvements.
- Collaborate with operators and managers to reduce re-mill, rejects, and customer complaints.
- Assist in the training and upskilling of production staff on quality processes and standards.
Job Type: Full-time
Pay: Php16, Php18,000.00 per month
Benefits:
- Promotion to permanent employee
Education:
- Bachelor's (Required)
Experience:
- feedmill production or quality assurance: 3 years (Required)
Work Location: In person
qa calibrator/technician
Posted today
Job Viewed
Job Description
BASIC QUALIFICATIONS
· Graduate of any BS Engineering Course
· With at least 1 year of relevant work experience in manufacturing or service setting, or as a Technician/Technical job involving equipment, quality assurance, PLC.
· Obtained a Certification in Calibration/Instrumentation/Control (NCII)
· Able to communicate well both spoken and written
· Knowledgeable in MS Application especially in Excel and presentation.
BRIEF JOB RESPONSIBILITIES:
Coordinates scheduled calibration of test and measuring instrument with third-party.
Handles verification of measuring instruments and test equipment. Prepares verification reports and status on a monthly and quarterly basis.
Assists in training and coaching of employees on calibration and metrology.
Prepares equipment scheduled for third-party calibration.
Performs minor troubleshooting of electronic and electrical equipment or instrument.
Assists customer in their queries during Pre-Delivery inspection
Prepares the corresponding report of tested cables for both in-process and finished cable.
Be The First To Know
About the latest Qa technician Jobs in Philippines !
QA Laboratory Technician
Posted today
Job Viewed
Job Description
General Santos
Philippines
Research & Development
Job Description
Job Purpose:
As Laboratory Technical, this person is responsible in performing NIR analysis and chemical analysis as prescribed in the Work Instruction Manual and operate laboratory equipment according to the Equipment's Operation Manual. This person is responsible to monitor trend of analysis and report any deviation to the Laboratory Supervisor.
Your Responsibilities:
- Assess and segregate samples for analysis based on the quality control plan.
- Conduct required wet chemistry analysis and mycotoxin analysis of raw material, finished product and special samples according to procedure laid down in the work instruction manual.
- Check accuracy of result using the quality control sample from ring trial test or internal QC sample.
- Plot result of quality control sample in a chart and monitor the trend.
- Report to Laboratory Supervisor if trends are outside the set limit.
- Prepare reagents, conduct standardization and monitor expiry date of prepared solution.
- Record clearly all data of analysis, chemical preparation and standardization in the designated logbook for traceability.
- Conduct daily monitoring and calibration of analytical balance, top loading balance and rapid moisture analyzer
- Input wet chemistry results in the updated laboratory template
- Reports results and create certificate of analysis of all special samples from prospect suppliers.
- Submit updated mycotoxin report after every test performed.
- Prepare internal quality control sample and conduct the needed test. Report results to laboratory Supervisor
- Conduct monthly inventory of glassware, chemicals and laboratory consumables. Inform Laboratory Supervisor on items with critical inventory and initiate the requisition process.
- Monitor expiry date of chemicals and facilitate its disposal.
- Maintain record of any defect and repair/maintenance conducted on laboratory equipment, reception of labware and chemicals and breakages
- Maintain updated work instructions of all methods applied in the laboratory.
- Maintain record of all chemical waste used in the analysis for third party disposal.
- Maintain the cleanliness and orderliness of the laboratory.
- Monitor temperature and humidity of wet chemistry room and equipment.
- Perform basic troubleshooting if there are malfunctions in the equipment. Report to Laboratory Supervisor.
- Follow proper turn-over work.
- Analyze incoming raw materials and finished products using NIR machine.
Your Profile:
- A graduate of B. S. Chemistry, Biology, Chemical Engineering or any applied science course.
- Licensed Chemist/Licensed Chemical Technician.
- Experience in laboratory operation is an advantage but fresh graduate may qualify.
- Knowledgeable in Microsoft application (Excel, Word, PowerPoint)
- Can work with minimum supervision.
- Flexible and can do multi-tasking job.
- Willing to work in shifting schedule.
- With good moral character.
- The job requires to work in shifting schedule and weekend work if necessary.
Your Future Perspective:
- Challenging tasks, short decision-making processes and a high level of personal responsibility
- Room for innovative thinking and growth with the possibility to manage your own career path.
- A company culture which promotes continuous learning and diversity.
- Excellent career opportunities in a world leading nutrition company.
- ADM is a company where managers and colleagues are encouraged to discuss and enable the flexibility that is needed to meet the demands of work and life.
#IncludingYou
Diversity, equity, inclusion and belonging are cornerstones of ADM's efforts to continue innovating, driving growth, and delivering outstanding performance. We are committed to attracting and retaining a diverse workforce and create welcoming, truly inclusive work environments — environments that enable every ADM colleague to feel comfortable on the job, make meaningful contributions to our success, and grow their career. We respect and value the unique backgrounds and experiences that each person can bring to ADM because we know that diversity of perspectives makes us better, together.
For more information regarding our efforts to advance Diversity, Equity, Inclusion & Belonging, please visit our website here: Culture, Engagement & Inclusion | ADM.
About ADM
At ADM, we unlock the power of nature to provide access to nutrition worldwide. With industry-advancing innovations, a complete portfolio of ingredients and solutions to meet any taste, and a commitment to sustainability, we give customers an edge in solving the nutritional challenges of today and tomorrow. We're a global leader in human and animal nutrition and the world's premier agricultural origination and processing company. Our breadth, depth, insights, facilities and logistical expertise give us unparalleled capabilities to meet needs for food, beverages, health and wellness, and more. From the seed of the idea to the outcome of the solution, we enrich the quality of life the world over. Learn more at
Req/Job ID
BR
Ref ID
LI-DNIQuality Control
Posted today
Job Viewed
Job Description
Benefits
- Competitive compensation package
- Performance-based cash incentives
- Performance-based salary increase
- Employee discounts and gift certificates
- HMO for employee and dependents
- Above standard leave credits (including birthday leave)
- Employee engagement events and activities
- Monday to Friday workweek
- Terms and conditions apply
Responsibilities
- Perform in-process, incoming, and final inspections of materials and finished products.
- Conduct quality tests using various instruments, equipment, or lab procedures depending on the product type.
- Document and report non-conformances, and follow up on corrective and preventive actions (CAPA).
- Maintain and calibrate testing equipment and ensure its proper functioning.
- Prepare and maintain QC documentation including test reports, checklists, certificates, and logs.
Qualifications
- Diploma or Bachelor's degree in Science, Engineering, Food Technology, or related field.
- 2–5 years of experience in quality control or quality assurance role.
- Knowledge of testing procedures, sampling methods, and quality systems.
- Familiarity with regulatory standards (ISO 9001, GMP, FDA).
- Strong attention to detail and documentation skills.
Follow us for more job openings and updates
Facebook : Bioessence Careers
Indeed : Bioessence Group of Companies
Job Type: Full-time
Job Type: Full-time
Work Location: In person
Quality Control
Posted today
Job Viewed
Job Description
JOB DESCRIPTION:
- Examine products for defects and test functionality
- Observe and evaluate manufacturing and operational processes
- Record and analyze inspection results
QUALIFICATION:
- At least High School/Senior High School graduate
- With related experience as Quality Control/Quality Assurance
- With available basic requirements (SSS, Philhealth, Pagibig, TIN)
- Willing to start ASAP
LOCATION: Mawaque Road, Mabalacat, Pampanga