40 Piping Engineer jobs in the Philippines

I. Job Purpose

To provide high-level technical work by performing all other duties as assigned not limited to 2D drafting, 3D modeling, and producing high-quality deliverables such as plot plans, general arrangement drawings, piping plans, isometric drawings, material take-off, etc. while ensuring conformance to all Codes and procedures related to engineering functions, labor reporting, and systems reporting; and active interface with the project team, vendors, and clients. May act as a project lead and serve as a Checker.

II. Key Outputs

1. Engineering and Design

• Works on a specific project to complete, working as a fully competent engineer in all conventional aspects of the subject matter or the functional area of the assignment;
• Considers construction costs, government regulations, potential environmental hazards, and other factors in planning stages and risk analysis;
• Interprets and applies code requirements;
• Makes decisions independently on engineering problems and methods;
• Requires the use of advanced techniques and the modification and extension of theories, precepts, and practices of the field;
• Prepares piping package deliverables with safety, maintenance, operability, and cost-efficient considerations;
• Coordinates with other engineers to ensure that interrelated work is considered in the work assigned;
• Reviews engineered drawings for consistency with work scope and adequately addresses input from disciplines;
• Evaluates, selects, and applies standard engineering techniques, procedures, and criteria using judgment in making minor adaptations and modifications;
• Prepares vessel nozzle orientation drawings;
• Conducts vendor document reviews and model reviews;
• Performs line studies;
• Prepares platform and ladder arrangements;
• Performs site visits and project walk-downs requiring climbing and as-built information gathering. This may require working with surveying equipment and other measuring tools.
• Performs other tasks that the immediate superior may assign.

2. May be nominated for a Project Lead Role to perform the following:

• Performs as a senior professional in a lead capacity in planning, preparing, and supervising the development of detailed designs and specifications for small projects;
• Participates in project planning and preparation of budgets and estimates;
• Assists designers in the proper execution of drawings.
• Prepares scope documents, manhour estimates, schedules, earned value progress reports, and change control;
• Prepares cost estimates.

III. Minimum Qualifications

1. Education:

• Bachelor of Science degree in Mechanical Engineering or equivalent.
• A professional license is desired but not required.

2. Experience:

• At least five years of experience in the same field of work.

3. Skills and Knowledge:

• Knowledge of piping discipline and general knowledge of other disciplines
• Knowledge of the design, selection, and application of pipe-supporting elements
• Knowledge of internal economic factors affecting assignment areas (costs, margins, profit impact of decisions)
• Overall understanding of technical disciplines and project execution
• Must know ASME B31.1 and ASME B31.3
• Familiarity with API codes
• Preferably with Power Plant design experience.
• Must have the knowledge and/or experience with AutoCAD software
• Ability to navigate a 3D CAD model
• Knowledge of Basic Piping Stress

• Knowledge of any of the following modeling software:

• E3D

• AutoCAD Plant 3D
• CadWorx
• Knowledge in pipeline
• Knowledge of underground piping design
• Knowledge of Hot Taps
• Knowledge of construction works/walkdowns
• Advanced computer skills with MS Office programs

4. Behavioral/Physical:

• Strong written and verbal communication skills are required
• Commitment to quality, responsibility, high work standards, and initiatives
• Ability to communicate clearly and effectively verbally and in writing, as well as strong interpersonal skills and relationship building.
• Ability to organize work assignments
• Ability to prioritize work assignments
• Ability to coordinate a variety of tasks
• Ability to deal with conflicting priorities and deadlines
• Good attention to detail
• Ability to mentor, lead, train, and motivate employees

SUCCESSFUL CANDIDATES WILL BE EXTENDED JOB OFFERS COMMENSURATE WITH JOB-RELATED COMPETENCIES AND EXPERIENCES.

Company Name: Astec Engineering

Position: Piping Designer / Engineer (AutoCAD Plant 3D)

Location: Cebu City

Qualification:

Graduate of Mechanical Engineering

With strong experience in Piping Design and Engineering

Strong knowledge in AutoCAD Plant 3D

Detail-oriented, analytical, and able to work under minimal supervision

At least 3 to 5 years experience in piping design (Plant project preferred)

Willing to work under pressure and overtime if necessary

Responsibility:

Design and suggests piping route with design documents received

Piping Arrangement Drawings, Isometric Drawings, Support Drawings, Plot Plan Drawings

Coordinate with project team for accurate and efficient designs

Strictly adhere to project schedule and deadlines for all drawings and designs

Opportunity to work with an international engineering team

What We Offer:

Contractual employment (6 months) – extension or renewal based on performance evaluation

Competitive salary (depends on qualification and experience)

Potential for long-term engagement depending on performance

Interested may send their resume and portfolio to

About the role

EEI Corporation is seeking an experienced Piping Engineer to join our team in Batangas, Calabarzon. This is a full-time position where you will be responsible for the design, installation, and maintenance of piping systems for our industrial projects. As a Piping Engineer, you will play a crucial role in ensuring the safe and efficient operation of our facilities.

What you'll be doing

1. Preparing detailed piping designs and engineering drawings
2. Conducting stress and hydraulic analyses to optimise piping systems
3. Selecting appropriate piping materials and components
4. Overseeing the installation and commissioning of piping systems
5. Troubleshooting and resolving issues with existing piping systems
6. Ensuring compliance with relevant codes, standards, and regulations
7. Collaborating with cross-functional teams to deliver successful projects

What we're looking for

1. Bachelor's degree in Mechanical Engineering or a related field
2. 5 years of experience as a Piping Engineer
3. Proficient in the use of piping design software (e.g., AutoCAD, PipeFlow)
4. Strong analytical and problem-solving skills
5. Excellent attention to detail and a commitment to safety
6. Good communication and interpersonal skills
7. Familiarity with relevant industry codes and standards (e.g., ASME, ANSI)

What we offer

At EEI Corporation, we are committed to providing our employees with a rewarding and fulfilling work experience. As a Piping Engineer, you will have the opportunity to work on challenging and innovative projects, alongside a talented team of engineering professionals. We offer competitive salaries, comprehensive benefits, and ongoing professional development opportunities to help you grow your career.

About us

EEI Corporation is a leading engineering, procurement, and construction company in the Philippines, with a strong track record of delivering high-quality industrial projects across a wide range of sectors. Our mission is to be the partner of choice for our clients, delivering sustainable and innovative solutions that drive progress and transform communities. Join our team and be a part of our exciting journey.

Apply now

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good.

Your impact

As part of our expanding team in the Philippines, we are looking for a Piping Engineer to support our Water projects. In this role, you will

• Perform plant and piping design activities as part of a multidisciplinary taskforce.
• Collaborate with other designers and engineers using 3D integrated design systems such as AP3D and CADWorx3D.
• Conduct self-quality checks for 3D modeling and piping deliverables.
• Participate in design reviews, risk assessments, and vendor bid evaluations.
• Assist in preparing proposals, scopes of work, schedules, and budgets for projects.

Here's what you'll need

Qualifications & Experience

• Bachelor's degree in Mechanical or Piping Engineering.
• Experience in piping engineering/design within the chemical industry.
• Proficiency in 3D modeling using tools like AP3D or CADWorx3D.
• Familiarity with Navisworks for reviews and clash detection.
• Knowledge of LEAN work practices and their application in project delivery.
• Experience in stress analysis (L1 SEP, L2 Simplified).
• Skilled in equipment layout, piping design, and pipe supports.
• Strong command of AutoCAD and Microsoft Office Suite (Word, Excel).
• Good written and spoken English communication skills.
• Understanding of piping-specific design standards (minimum US/EU).
• Ability to collaborate with other disciplines, clients, and vendors at all levels.
• Strong interpersonal skills and ability to thrive in a fast-paced, deadline-driven environment.
• Experience with laser scan-generated point clouds and field work is an advantage.

From our inclusive employee networks to our positive mental health champions – we're committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally - and together, our diverse perspectives and unique backgrounds power our collective strength. We collaborate and share By supporting one another, we all succeed.

With safety and flexibility always top of mind, we've gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You'll uncover flexible working arrangements, benefits and opportunities to do good too – from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.

No matter what drives you, you'll discover how you can cultivate, nurture and achieve your goals – all at a single global company.

We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.

Your application experience is important to us, and we're keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good.

Your impact

In this role, you will

• Perform plant and piping design activities as part of a taskforce under the guidance of a team leader.
• Collaborate with multi-discipline designers using 3D integrated design systems (e.g., AP3D, CADWorx3D).
• Conduct self-quality reviews for 3D modeling and piping deliverables.
• Participate in design reviews, risk assessments, and vendor bid evaluations.
• Assist in the preparation of proposals, scopes, schedules, and budgets for projects.

Here's what you'll need

Qualifications & Experience

• Bachelor's degree in Mechanical or Piping Engineering (preferred).
• Experience in piping engineering/design within the chemical industry.
• Proficient in 3D modeling tools (e.g., AP3D, CADWorx) and AutoCAD.
• Familiar with Navisworks for model reviews and clash detection.
• Knowledge of piping design standards (US/EU) and LEAN work practices.
• Strong skills in equipment layout, pipe supports, and stress analysis (L1 SEP, L2 Simplified).
• Proficient in Microsoft Office Suite and fluent in written and spoken English.
• Strong interpersonal and communication skills; able to work in fast-paced, multi-disciplinary teams.

From our inclusive employee networks to our positive mental health champions – we're committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally - and together, our diverse perspectives and unique backgrounds power our collective strength. We collaborate and share By supporting one another, we all succeed.

With safety and flexibility always top of mind, we've gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You'll uncover flexible working arrangements, benefits and opportunities to do good too – from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.

No matter what drives you, you'll discover how you can cultivate, nurture and achieve your goals – all at a single global company.

We value collaboration and believe that in-person interactions are crucial for both our culture and client delivery. We empower employees with our hybrid working policy, allowing them to split their work week between Jacobs offices/projects and remote locations enabling them to deliver their best work.

Your application experience is important to us, and we're keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.

RESPONSIBILITIES

• Develop equipment layout.
• Develops equipment and piping models, piping drawings, and isometrics using 3D design software.
• Understand and meet budgets and schedules.
• Value Engineering and Work Process Improvements – Develop and implement time and money-saving ideas/suggestions that improve design production, safety, and quality on a project
• Share Knowledge – Actively engage in mentoring or teaching other employees.
• Coordinates with other departments and the US office.

PROJECT ROLES

• Designer
• Checker
• Designer/Drafter
• Isometric Control Technician

QUALIFICATIONS

Education& Registration:

• Graduate of BS in Mechanical Engineering
• Registered Mechanical Engineer

Experience:

• With 8-10 years of experience as a Piping Engineer or Designer.
• Should have at least 5 years of experience related to Petrochemical or other process industries.
• Able to create piping layout based on the provided Process Flow Diagram (PFD), Piping and Instrumentation Diagram (P&ID), and Equipment Layout.
• Capable of drafting and checking Piping Isometrics, Piping Supports, and General Arrangement drawings.

AutoCAD Plant 3D Skills:

• Applicant should have at least 2 years of experience working with AutoCAD Plant 3D Software.
• Able to perform administrative tasks such as project setup, spec editor usage, and catalog creation.
• Able to develop and modify 3D models of piping systems, pipe supports, equipment, and structures for large-scale projects.
• Capable of generating and managing project deliverables such as isometric drawings, orthographic drawings, and Bills of Materials (BOM).

OTHER INFORMATION

Working Conditions

• Onsite, Monday to Friday, 7:30 AM to 4:30 PM

Hiring Process

• 2-3 interview (depending on the availability of the interviewer, may be conducted online or in-person).

Benefits (upon regularization)

• HMO (Employee)
• Transportation
• Rice Subsidy
• Leave Credits: 15 Sick Leave, 12 Vacation Leave, 5 Emergency Leave, 5 Bereavement Leave. (unused SL & VL are convertible into cash)
• Bonuses aside from 13th month pay: Annual and Performance Bonus

Job Types: Full-time, Permanent

Pay: Php65, Php75,000.00 per month

Benefits:

• Additional leave
• Company Christmas gift
• Health insurance
• Paid training

Application Question(s):

• How much is your expected salary?

Work Location: In person

Our Company

CRESS MIRAI Inc. is the Philippine office of a Japanese engineering company.

The parent company is a well-established company with over 60 years of history in Japan.

We are looking for a colleague as a Plant Piping Engineer with over 5 years of experience in design and planning.

For engineering, we use software such as 3D-CAD (AutoCAD Plant 3D, CADWorx) and 2D-CAD (AutoCAD) as tools.

Visit our website to get an overview of our work and values.

Job Description

Piping design for infrastructure facilities such as power plants and waste treatment plants.

You will be responsible for a wide range of piping engineering tasks in these projects—from basic design activities, such as selecting piping routes and defining piping specifications, to detailed design work using 3D-CAD.

This includes creating piping detail layouts, support drawings, and isometric diagrams, as well as performing pipe stress analysis and thermal calculations.

In the future, we are looking for someone who can take a leading role in building a team focused on piping planning design, and who can also collaborate and coordinate effectively with engineers from other plant design disciplines.

WorkplaceWe follow a hybrid work style that includes both on-site and remote work.

Remote work becomes an option once you're able to handle tasks on your own—from basic design through to technical drawings.

Until then, you'll be working on-site, where you'll receive detailed support for your assignments.

Requirements

Candidate must possess Bachelor's/College Degree of in mechanical engineering or equivalent.

Candidates must have at least 5 years of experience in design and planning as a plant piping engineer.

The required language is English, and you must be able to communicate smoothly both orally and in writing.

Additionally, Japanese Language Proficiency Test certification is not required, but preference will be given to those who can speak Japanese orally.

In addition to the questions below, please answer these as well.

• What kind of work scope do you experience as a piping design engineer?

• Are you interested in leading a team of several people as a team leader (management and direction)? Or do you have experience working in such a position?

Employment Details:

• Contract-based
• Monday to Saturday

Job Responsibilities:

Piping Design & Engineering

• Create piping layouts, isometrics, and P&IDs
• Perform hydraulic, pressure loss, and stress calculations
• Design piping systems and supports to international standards
• Review and approve drawings and technical documents
• Ensure accurate pipe support placement and material use

Vendor Coordination

• Review and evaluate vendor proposals and documentation
• Attend technical meetings and support vendor inspections
• Monitor vendor performance and ensure quality compliance

Technical Support & Client Communication

• Answer technical queries from clients
• Join design reviews and clarify client comments
• Visit construction sites to check proper installation and quality

Coordination with Other Disciplines

• Work with Civil, Electrical, Process, and Equipment teams
• Coordinate support locations and resolve design clashes

Materials & Procurement

• Review BOMs and technical specs for piping materials
• Track material needs, deliveries, and availability
• Prepare MTOs and support procurement evaluations

Quantity Tracking

• Track and update piping material usage
• Coordinate with construction for quantity checks

Reporting & Documentation

• Maintain schedules and report risks or issues
• Document decisions, KPIs, and lessons learned

Job Qualifications:

Must-Have

• Bachelor's Degree in Mechanical Engineering (or related field)
• 10+ years in piping design for industrial plants
• Experience in wastewater treatment or EPC projects
• Offshore team management experience
• Strong knowledge of international and Philippine piping codes
• Skilled in pipe support design and load calculations
• Experience coordinating across engineering disciplines
• Proficient in material specification, BOMs, and procurement
• Fluent in English with strong communication skills
• Familiar with Microsoft Office

Overview

We are seeking a highly skilled Piping/Design Engineer with proven expertise in 3D design and modeling software for industrial and infrastructure projects. The ideal candidate will have strong technical experience in plant design, piping layouts, and integration of point cloud data into engineering workflows.

Key Responsibilities

• Develop and review 3D models, piping layouts, and detailed design deliverables using SmartPlant 3D (S3D).
• Utilize TruView point cloud scans and Average Point Cloud Manager for model integration, clash detection, and verification of as-built conditions.
• Create and update design drawings, isometrics, and schematics using Microstation (SE/J/V8) and AutoCAD Plant 3D.
• Interpret engineering specifications, project requirements, and industry standards to produce accurate and compliant designs.
• Collaborate with multidisciplinary teams (mechanical, structural, electrical, instrumentation) to ensure project alignment.
• Support design reviews, resolve technical issues, and provide input for construction and procurement.

Qualifications

• Bachelor's degree in Engineering (Mechanical, Civil, or related discipline).
• Minimum 5+ years of design experience in oil & gas, petrochemical, industrial, or related sectors.
• Hands-on expertise with:
• SmartPlant 3D (S3D)
• TruView point cloud scans
• Microstation SE/J/V8
• AutoCAD Plant 3D
• Average Point Cloud Manager
• Strong understanding of piping design, equipment layouts, and clash management.
• Familiarity with industry codes and standards (ASME, API, etc.) preferred.
• Excellent communication and collaboration skills.

Job Type: Full-time

Pay: Php40, Php75,000.00 per month

Work Location: Remote