385 On Site Service jobs in the Philippines

On Site Service Technician

Tinogboc, Antique Cummins

Posted today

Job Viewed

Tap Again To Close

Job Description

DESCRIPTION

Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.

Key Responsibilities:

  • Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs.
  • Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
  • Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
  • Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
  • Completes training in line with skill and business requirements Maintains work area and tools for cleanliness and proper operation.
  • Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation

RESPONSIBILITIES

Competencies:

  • Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
  • Customer focus - Building strong customer relationships and delivering customer-centric solutions.
  • Ensures accountability - Holding self and others accountable to meet commitments.
  • Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
  • Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
  • Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
  • Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
  • Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
  • Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
  • Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
  • Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
  • Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications:

  • Apprentice Trained Power Generation and/or Engine Technician (Preferred)
  • Vocational diploma from relevant technical institution
  • Current relevant electrical certification (optional)
  • Locally valid driving permit.
  • This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

  • Minimal level of workshop related experience required.
  • Basic level knowledge of and/or experience with Cummins products
  • High Voltage/ Low Voltage experience (optional)

QUALIFICATIONS

A motivated self-starter and work well under pressure.

Job Service

Organization Cummins Inc.

Role Category On-site

Job Type Technician

ReqID

Relocation Package No

This advertiser has chosen not to accept applicants from your region.

On Site Service Technician

Tinogboc, Antique ₱20000 - ₱40000 Y Agensi Pekerjaan KELLY OCG Sdn Bhd

Posted today

Job Viewed

Tap Again To Close

Job Description

Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.

Key Responsibilities:

  • Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs.
  • Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
  • Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
  • Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
  • Completes training in line with skill and business requirements Maintains work area and tools for cleanliness and proper operation.
  • Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation

RESPONSIBILITIES

Competencies:

  • Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
  • Customer focus - Building strong customer relationships and delivering customer-centric solutions.
  • Ensures accountability - Holding self and others accountable to meet commitments.
  • Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
  • Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
  • Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
  • Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
  • Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
  • Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
  • Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
  • Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
  • Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications:

  • Apprentice Trained Power Generation and/or Engine Technician (Preferred)
  • Vocational diploma from relevant technical institution
  • Current relevant electrical certification (optional)
  • Locally valid driving permit.
  • This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

  • Minimal level of workshop related experience required.
  • Basic level knowledge of and/or experience with Cummins products
  • High Voltage/ Low Voltage experience (optional)
This advertiser has chosen not to accept applicants from your region.

On Site Service Technician

Tinogboc, Antique ₱600000 - ₱800000 Y Cummins Asia Pacific

Posted today

Job Viewed

Tap Again To Close

Job Description

Description
Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.

Key Responsibilities

  • Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs.
  • Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
  • Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
  • Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
  • Completes training in line with skill and business requirements Maintains work area and tools for cleanliness and proper operation.
  • Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation

Responsibilities
Competencies:

  • Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
  • Customer focus - Building strong customer relationships and delivering customer-centric solutions.
  • Ensures accountability - Holding self and others accountable to meet commitments.
  • Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
  • Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
  • Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
  • Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
  • Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
  • Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
  • Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
  • Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
  • Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
  • Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications

  • Apprentice Trained Power Generation and/or Engine Technician (Preferred)
  • Vocational diploma from relevant technical institution
  • Current relevant electrical certification (optional)
  • Locally valid driving permit.
  • This position may require licensing for compliance with export controls or sanctions regulations.

Experience

  • Minimal level of workshop related experience required.
  • Basic level knowledge of and/or experience with Cummins products
  • High Voltage/ Low Voltage experience (optional)

Qualifications
A motivated self-starter and work well under pressure.

Job
Service

Organization
Cummins Inc.

Role Category
On-site

Job Type
Technician

ReqID

Relocation Package
No

This advertiser has chosen not to accept applicants from your region.

On Site Service Technician - Level I

Cummins Inc.

Posted 5 days ago

Job Viewed

Tap Again To Close

Job Description

**DESCRIPTION**
Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.
**Key Responsibilities:**
+ Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs.
+ Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
+ Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
+ Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
+ Completes training in line with skill and business requirements Maintains work area and tools for cleanliness and proper operation.
+ Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation
**RESPONSIBILITIES**
**Competencies:**
+ Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
+ Customer focus - Building strong customer relationships and delivering customer-centric solutions.
+ Ensures accountability - Holding self and others accountable to meet commitments.
+ Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
+ Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
+ Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
+ Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
+ Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
+ Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
+ Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
+ Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
+ Values differences - Recognizing the value that different perspectives and cultures bring to an organization.
**Education, Licenses, Certifications:**
+ Apprentice Trained Power Generation and/or Engine Technician (Preferred)
+ Vocational diploma from relevant technical institution
+ Current relevant electrical certification (optional)
+ Locally valid driving permit.
+ This position may require licensing for compliance with export controls or sanctions regulations.
**Experience:**
+ Minimal level of workshop related experience required.
+ Basic level knowledge of and/or experience with Cummins products
+ High Voltage/ Low Voltage experience (optional)
**QUALIFICATIONS**
A motivated self-starter and work well under pressure.
**Job** Service
**Organization** Cummins Inc.
**Role Category** On-site
**Job Type** Technician
**ReqID**
**Relocation Package** No
This advertiser has chosen not to accept applicants from your region.

On Site Service Technician - Level I

Cummins Inc.

Posted 9 days ago

Job Viewed

Tap Again To Close

Job Description

**DESCRIPTION**
Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.
**Key Responsibilities:**
+ Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs
+ Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
+ Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
+ Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
+ Completes training in line with skill and business requirements.
+ Maintains work area and tools for cleanliness and proper operation Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation
**RESPONSIBILITIES**
**Competencies:**
+ Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
+ Customer focus - Building strong customer relationships and delivering customer-centric solutions.
+ Ensures accountability - Holding self and others accountable to meet commitments.
+ Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
+ Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
+ Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
+ Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
+ Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
+ Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
+ Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
+ Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
+ Values differences - Recognizing the value that different perspectives and cultures bring to an organization.
**Education, Licenses, Certifications:**
+ Apprentice Trained Power Generation and/or Engine Technician (Preferred)
+ Vocational diploma from relevant technical institution
+ Current relevant electrical certification (optional)
+ Locally valid driving permit.
+ This position may require licensing for compliance with export controls or sanctions regulations.
**Experience:**
+ Minimal level of workshop related experience required.
+ Basic level knowledge of and/or experience with Cummins products
+ High Voltage/ Low Voltage experience (optional)
**QUALIFICATIONS**
A motivated self-starter and work well under pressure.
**Job** Service
**Organization** Cummins Inc.
**Role Category** On-site
**Job Type** Technician
**ReqID**
**Relocation Package** No
This advertiser has chosen not to accept applicants from your region.

On Site Service Technician - Level I

Cummins Inc.

Posted 9 days ago

Job Viewed

Tap Again To Close

Job Description

**DESCRIPTION**
Completes preventative maintenance and/or basic repair activities on Cummins products at a single customer site with minimal direction.
**Key Responsibilities:**
+ Engages with customer in a courteous and professional manner. Ensures prompt and efficient attention to customer needs.
+ Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete basic repairs, including preparing required parts and tools.
+ Escalates unresolved issues to more experienced On Site Technicians and/or Supervisor Performs preventative maintenance activities as per documented schedules and standards on Cummins products at a customer's location.
+ Completes required documentation, such as service worksheets, timesheets, warranty claims via handwritten forms or business system input screens.
+ Completes training in line with skill and business requirements Maintains work area and tools for cleanliness and proper operation.
+ Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation
**RESPONSIBILITIES**
**Competencies:**
+ Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
+ Customer focus - Building strong customer relationships and delivering customer-centric solutions.
+ Ensures accountability - Holding self and others accountable to meet commitments.
+ Plans and aligns - Planning and prioritizing work to meet commitments aligned with organizational goals.
+ Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
+ Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
+ Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
+ Electrical Knowledge - Demonstrates knowledge of Cummins and industry standards on working with low and/or high voltage by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies basic electrical theories and electronics components knowledge using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
+ Mechanical Knowledge - Demonstrates knowledge of Cummins and industry standards by complying with all safe work procedures including Personal Protective Equipment to create a safe work environment; applies mechanical principles and theories using appropriate tools and procedures to diagnose and repair products safely and efficiently.
+ Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
+ Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
+ Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
+ Values differences - Recognizing the value that different perspectives and cultures bring to an organization.
**Education, Licenses, Certifications:**
+ Apprentice Trained Power Generation and/or Engine Technician (Preferred)
+ Vocational diploma from relevant technical institution
+ Current relevant electrical certification (optional)
+ Locally valid driving permit.
+ This position may require licensing for compliance with export controls or sanctions regulations.
**Experience:**
+ Minimal level of workshop related experience required.
+ Basic level knowledge of and/or experience with Cummins products
+ High Voltage/ Low Voltage experience (optional)
**QUALIFICATIONS**
A motivated self-starter and work well under pressure.
**Job** Service
**Organization** Cummins Inc.
**Role Category** On-site
**Job Type** Technician
**ReqID**
**Relocation Package** No
This advertiser has chosen not to accept applicants from your region.

On-site Service Personnel

₱300000 - ₱600000 Y SPD Jobs, Inc.

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Responsibilities

1、Perform scheduled monthly inspections of the data center to ensure stable operation of

UPS, batteries, precision air conditioning, power distribution, fire protection, and weak

current systems.

2、Responsible for routine maintenance, fault diagnosis, emergency handling, and repair of

data center equipment, and submit timely fault and optimization reports.

3、Carry out on-site operations under remote guidance, assisting professional leaders and

vendors in inspection, testing, and modifications.

4、Manage and distribute spare parts, ensure stock availability, and maintain

communication and coordination with equipment vendors.

5、Complete operation logs, inspection records, and maintenance reports to ensure

accuracy and completeness.

6、Strictly comply with safety standards and operating procedures to ensure the continuity

and stability of data center infrastructure.

Qualifications

1、College degree or above in Electrical, HVAC, Fire Protection, Weak Current,

Electromechanical, or related majors.

2、Familiar with data center infrastructure, including power supply and distribution, UPS

and batteries, grounding systems, precision air conditioning, cabling systems, gas fire

suppression, security monitoring, access control, and environmental monitoring systems.

3、Experienced in UPS and battery maintenance, including charge/discharge testing, and

able to independently handle common power issues.

4、Familiar with data center operation principles, emergency plans, and optimization

methods, and capable of handling common faults independently.

5、Experience in data center or computer room construction and operation & maintenance

is preferred.

6、Possess good learning ability, sense of responsibility, and teamwork spirit.

Willing to be assign NCR, NLZ, SLZ, VIS, MIN.

This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest On site service Jobs in Philippines !

On-site Service Personnel

₱12000000 - ₱90000000 Y Commsec Inc

Posted today

Job Viewed

Tap Again To Close

Job Description

Qualifications

1、College degree or above in Electrical, HVAC, Fire Protection, Weak Current,

Electromechanical, or related majors.

2、Familiar with data center infrastructure, including power supply and distribution, UPS

and batteries, grounding systems, precision air conditioning, cabling systems, gas fire

suppression, security monitoring, access control, and environmental monitoring systems.

3、Experienced in UPS and battery maintenance, including charge/discharge testing, and

able to independently handle common power issues.

4、Familiar with data center operation principles, emergency plans, and optimization

methods, and capable of handling common faults independently.

5、Experience in data center or computer room construction and operation & maintenance

is preferred.

6、Possess good learning ability, sense of responsibility, and teamwork spirit.

Area assigned:

NCR 2

SLZ 2

NLZ 2

VIS 2

MIN 2

Job Type: Full-time

Pay: Php30, Php40,000.00 per month

Work Location: In person

This advertiser has chosen not to accept applicants from your region.

Fleet Maintenance Service Supervisor

Pasig City, National Capital Region ₱144000 - ₱360000 Y Myriad ICT Services, Inc.

Posted today

Job Viewed

Tap Again To Close

Job Description

Job Summary

To manage and oversee the repair and maintenance services tasks of the Fleet Management and to ensure all vehicles are properly maintained and operational, including the periodic PMI & PMS scheduling.

Qualifications

  • College graduate

  • Applicant must have extensive background in Fleet Management and Maintenance operations (at least 3 years work experience)

  • Computer literate

  • Drivers license

Job Type: Full-time

Pay: From Php25,000.00 per month

Benefits:

  • Company events
  • Employee discount
  • Health insurance
  • Opportunities for promotion
  • Promotion to permanent employee

Work Location: In person

This advertiser has chosen not to accept applicants from your region.

Preventive Maintenance Service Mechanic

₱200000 - ₱300000 Y Delta Earthmoving Inc.

Posted today

Job Viewed

Tap Again To Close

Job Description

Reporting to the Equipment Supervisor, the Preventive Maintenance Mechanic is accountable and responsible for maintaining the correct level of PMS, lubrication oil, fuel and air cleaner filter of the equipment.

DUTIES AND RESPONSIBILITIES:

  1. Facilitate job order list including checking of service meter reading and odometer reading of the equipment.

  2. Check and correct level and condition of oil, fuel and air cleaner filter etc. depending on the type of equipment which was assigned.

  3. Make sure that the ignition key is pulled out before removing the filter and drain oil in the designated area to prevent spillage that can harm the environment.

  4. Dispose waste filter and used oil in accordance with the policy and procedure.

  5. Conduct visual inspection of the engine running.

  6. Provide new Preventive Maintenance Identification and next PMS schedule.

  7. Clean unit thoroughly.

  8. Record and monitor preventive maintenance services.

  9. Record on lube consumption, stock and proper storage of lubricants.

  10. Perform minor equipment repair during PMS such as bolt tightening, defective hose replacement, busted auto bulbs etc.

  11. Conduct inventory of oils and filters.

  12. See to it that all equipment after going PMS have PMS ID visible to the Operators/Drivers

  13. Perform other related duties as assigned.

QUALIFICATIONS, SKILLS AND EXPERIENCE:

  1. At least high school or vocational graduate

  2. At least four (4) year related experience.

  3. Passed the required trade test.

Job Types: Full-time, Fixed term

Benefits:

  • Company Christmas gift
  • Company events
  • Paid training

Work Location: In person

This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All On Site Service Jobs