717 Fpga Design jobs in the Philippines

Key Responsibilities

• Develop, debug, and maintain firmware for microcontrollers and embedded SoCs (bootloaders, RTOS, bare-metal).
• Write and integrate communication protocols (Modbus RTU/TCP, SNMP v1/v2c/v3, MQTT, REST APIs).
• Interface with telecom devices via UART, RS485, I2C, SPI, CAN, and Ethernet.
• Implement failover logic, watchdogs, data buffering, and low-power modes.
• Build firmware updaters (OTA/FOTA) with validation and rollback.
• Collaborate with hardware engineers for board bring-up and testing.
• Manage SNMP MIBs, traps, and telemetry formats.
• Ensure compliance with telecom standards and security best practices.

Qualifications

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with ARM Cortex, ESP32, or similar MCUs

Strong knowledge of Modbus, SNMP, MQTT, TCP/IP, serial protocols

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Skilled in debugging using JTAG, oscilloscopes, logic analyzers

Familiarity with Git and CI/CD workflows

Preferred Experience

- Telecom: BTS integration, site monitoring, hybrid energy systems

- 4G/5G modems, AT commands, dual-SIM failover logic

- SNMP MIB development and NMS integration

- Power/thermal management at firmware level

- Remote configuration, diagnostics, and FOTA

- Security: encrypted boot, TLS, credential management

Soft Skills

• Critical thinking and attention to detail
• Strong communication skills (written and verbal)
• Ability to work independently and within cross-functional teams
• Thrives in fast-paced, field-tested environments

Key Responsibilities

• Develop, debug, and maintain firmware for microcontrollers and embedded SoCs (bootloaders, RTOS, bare-metal).
• Write and integrate communication protocols (Modbus RTU/TCP, SNMP v1/v2c/v3, MQTT, REST APIs).
• Interface with telecom devices via UART, RS485, I2C, SPI, CAN, and Ethernet.
• Implement failover logic, watchdogs, data buffering, and low-power modes.
• Build firmware updaters (OTA/FOTA) with validation and rollback.
• Collaborate with hardware engineers for board bring-up and testing.
• Manage SNMP MIBs, traps, and telemetry formats.
• Ensure compliance with telecom standards and security best practices.

Qualifications

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with ARM Cortex, ESP32, or similar MCUs

Strong knowledge of Modbus, SNMP, MQTT, TCP/IP, serial protocols

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Skilled in debugging using JTAG, oscilloscopes, logic analyzers

Familiarity with Git and CI/CD workflows

Preferred Experience

Telecom: BTS integration, site monitoring, hybrid energy systems

4G/5G modems, AT commands, dual-SIM failover logic

SNMP MIB development and NMS integration

Power/thermal management at firmware level

Remote configuration, diagnostics, and FOTA

Security: encrypted boot, TLS, credential management

Soft Skills

• Critical thinking and attention to detail
• Strong communication skills (written and verbal)
• Ability to work independently and within cross-functional teams
• Thrives in fast-paced, field-tested environments

Job Type: Full-time

Pay: Php100, Php125,000.00 per month

Work Location: In person

Responsibilities:

Develop and debug firmware for MCUs (e.g., ARM Cortex, ESP32)

Implement protocols: Modbus, SNMP, MQTT, HTTP/HTTPS, REST APIs

Interface with hardware via UART, RS485, I2C, SPI, CAN, Ethernet

Build failover logic, watchdogs, low-power modes, and OTA updates

Collaborate on board bring-up and system validation

Manage SNMP MIBs, telemetry, and remote config tools

Ensure telecom compliance and embedded security standards

Required Skills and Qualifications:

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with firmware development for ARM Cortex, ESP32, or similar MCUs

Deep knowledge of embedded communication protocols: Modbus, SNMP, MQTT, TCP/IP, and serial interfaces

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Strong debugging and troubleshooting skills using JTAG, logic analyzers, oscilloscopes

Familiarity with Git and embedded CI/CD workflows

Job Type: Full-time

Pay: Php40, Php80,000.00 per month

Benefits:

• Opportunities for promotion

Work Location: In person

Qualifications:

• Candidate must possess at least Professional License (Passed Board/Bar/Professional License Exam) in Engineering (Electrical/Electronic) or equivalent
• At least 1 - 2 Year (s) of working experience in the related field is required for this position
• Good leadership qualities
• Hardworking and can work under pressure and minimal supervision
• With positive attitude towards co-workers and clients
• Must be flexible with work location and schedule
• Preferably knows how to drive and with driver's license
• Applicants must be willing to work in Bonifacio Global City

As an Electrical Engineer:

1. Evaluates electrical systems, products, components, and applications by designing and inspection; applying knowledge of electricity and materials.

2. Confirms system's and components' capabilities by designing testing methods and making sure the testing is done.

3. Provides electrical engineering information by answering questions and requests.

4. Maintains company reputation by complying with federal and state regulations.

5. Keeps equipment operational by following manufacturer's instructions and established procedures; requesting repair service when needed.

6. Maintains service data base by collecting, entering and analyzing data.

7. Completes projects by training and guiding technicians.

8. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.

9. Contributes to team effort by accomplishing related results as needed.

10. Inspects wiring of assemblies for accuracy of stripping, soldering, and crimping, and for defects, such as frayed wires, loose connections, and cracks.

11. Verifies wire and cable length, dimensions, and clearance of parts, using precision instruments.

12. Tests continuity and performance of parts, assemblies, and accessories, using test equipment.

13. Records acceptance or rejection of parts on inspection report, and indicates reason for rejection.

14. Keep track of all expenses incurred.

15. Implement 5S and Safety First Policies.

16. Respond to the client's needs and requests.

17. Comply with all ISO procedures.

18. Perform other duties and responsibilities that may be assigned from time to time.

Our office is located at Unit 104 Greenhills Court 25 Annapolis Street, San Juan City

Job Types: Full-time, Permanent

Benefits:

• Company car
• Free parking
• On-site parking
• Paid toll fees
• Paid training
• Pay raise
• Promotion to permanent employee

Education:

• Bachelor's (Required)

Experience:

• Electrical Engineering: 1 year (Preferred)

License/Certification:

• PRC Licensed Electrical Engineer (Required)

Job Description:

We are seeking a Licensed Electrical Engineer with 1 to 2 years of experience to join our team. The successful candidate will be responsible for designing, inspecting, and supervising electrical systems, preparing estimates, reading and interpreting plans, and ensuring compliance with standards and safety regulations.

Qualifications:

• Must be a Licensed Electrical Engineer (REE).
• With 1–2 years of relevant work experience.
• Skilled in estimating project requirements and reading electrical plans.
• Knowledgeable in electrical codes and safety practices.
• Willing to be assigned at the Head Office in Taguig City.

Job Type: Full-time

Work Location: In person

Application Deadline: 10/13/2025

Expected Start Date: 10/13/2025

Company Description

We suggest you enter details here.

Role Description

This is a full-time on-site role for an Electrical Engineer located in General Santos. The Electrical Engineer will be responsible for designing electrical systems, working on electricity distribution and power systems, and developing power distribution plans. Daily tasks include creating and reviewing electrical designs, ensuring project compliance with standards, troubleshooting system issues, and collaborating with other engineers and stakeholders to achieve project goals.

Qualifications

• Electrical Design and Electrical Engineering skills
• Knowledge and experience in Electricity and Power Systems
• Expertise in Power Distribution
• Strong problem-solving and troubleshooting abilities
• Excellent communication and teamwork skills
• Bachelor's degree in Electrical Engineering or related field
• Professional Engineering (PE) license is a plus
• Experience in industrial or commercial electrical projects is preferred

Job Responsibilities:

• Develop electrical designs, plans, and specifications for building construction projects.
• Conduct load calculations, circuit diagrams, and layout designs to optimize electrical system performance.
• Collaborate with architects, project managers, and other engineers to integrate electrical systems with overall project requirements.
• Supervise the installation of electrical wiring, equipment, and systems in accordance with design specifications.
• Ensure that electrical systems are installed safely, efficiently, and per local building codes and industry standards.
• Conduct site inspections to monitor progress and quality of electrical installations.
• Perform system testing to ensure functionality, reliability, and compliance with safety standards.
• Diagnose and resolve electrical issues, including system failures, outages, or faults.
• Recommend solutions to improve efficiency and system performance.
• Prepare detailed reports, technical drawings, and documentation for project handovers and regulatory purposes.
• Estimate electrical project costs and prepare budgets.
• Source materials, tools, and equipment in a cost-effective manner without compromising quality.
• Monitor project expenses to ensure adherence to approved budgets.
• Provide technical guidance and support to team members, including junior engineers and technicians.
• Participate in project meetings to discuss progress and address challenges.
• WILL BE ASSIGNED IN SANTA ANA CAGAYAN VALLEY

Qualifications:

• Bachelor's Degree in Electrical Engineering.
• Minimum 3 years of experience in electrical engineering for building construction projects.
• Proficiency in AutoCAD, Revit, and electrical design software. Knowledge of power distribution, lighting systems, and renewable energy integration is a plus.
• Strong problem-solving, project management, and communication skills. Ability to work effectively in a team and manage multiple tasks simultaneously.
• Strong electrical knowledge specifically in GENERATOR SETS

Job Type: Full-time

Pay: Php30, Php40,000.00 per month

Experience:

• Electrical Engineer: 1 year (Preferred)

Location:

• Santa Ana 3514 P03 (Required)

Work Location: In person

• Bachelor's Degree in Electrical Engineering
• Proven work experience in electrical design, system integration or power distribution
• Proficiency in CAD software
• Solid Understanding of electrical codes
• Strong Analytical and communication skills

Nice to Have: PE License, project management experience

Job Type: Full-time

Benefits:

• Paid training
• Staff meals provided

Work Location: In person

We are seeking a skilled and motivated Electrical Engineer to join our team in designing, developing, and maintaining solar power systems. The successful candidate will be responsible for overseeing electrical aspects of solar PV (photovoltaic) projects from concept through commissioning, ensuring compliance with industry standards and regulations, and contributing to the growth of renewable energy solutions.

Qualification:

• Bachelor's degree in Electrical Engineering (B.E. or equivalent); Master's degree is a plus.
• 1-2 years of experience in solar PV system design, installation, or maintenance.
• Experience working with utility interconnections, net metering, and power electronics.
• Strong analytical, communication, and project management skills.
• (Optional) Professional Engineer (PE) license or equivalent certification.