34 Embedded Systems Engineer jobs in the Philippines

Key Responsibilities

• Develop, debug, and maintain firmware for microcontrollers and embedded SoCs (bootloaders, RTOS, bare-metal).
• Write and integrate communication protocols (Modbus RTU/TCP, SNMP v1/v2c/v3, MQTT, REST APIs).
• Interface with telecom devices via UART, RS485, I2C, SPI, CAN, and Ethernet.
• Implement failover logic, watchdogs, data buffering, and low-power modes.
• Build firmware updaters (OTA/FOTA) with validation and rollback.
• Collaborate with hardware engineers for board bring-up and testing.
• Manage SNMP MIBs, traps, and telemetry formats.
• Ensure compliance with telecom standards and security best practices.

Qualifications

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with ARM Cortex, ESP32, or similar MCUs

Strong knowledge of Modbus, SNMP, MQTT, TCP/IP, serial protocols

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Skilled in debugging using JTAG, oscilloscopes, logic analyzers

Familiarity with Git and CI/CD workflows

Preferred Experience

- Telecom: BTS integration, site monitoring, hybrid energy systems

- 4G/5G modems, AT commands, dual-SIM failover logic

- SNMP MIB development and NMS integration

- Power/thermal management at firmware level

- Remote configuration, diagnostics, and FOTA

- Security: encrypted boot, TLS, credential management

Soft Skills

• Critical thinking and attention to detail
• Strong communication skills (written and verbal)
• Ability to work independently and within cross-functional teams
• Thrives in fast-paced, field-tested environments

Key Responsibilities

• Develop, debug, and maintain firmware for microcontrollers and embedded SoCs (bootloaders, RTOS, bare-metal).
• Write and integrate communication protocols (Modbus RTU/TCP, SNMP v1/v2c/v3, MQTT, REST APIs).
• Interface with telecom devices via UART, RS485, I2C, SPI, CAN, and Ethernet.
• Implement failover logic, watchdogs, data buffering, and low-power modes.
• Build firmware updaters (OTA/FOTA) with validation and rollback.
• Collaborate with hardware engineers for board bring-up and testing.
• Manage SNMP MIBs, traps, and telemetry formats.
• Ensure compliance with telecom standards and security best practices.

Qualifications

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with ARM Cortex, ESP32, or similar MCUs

Strong knowledge of Modbus, SNMP, MQTT, TCP/IP, serial protocols

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Skilled in debugging using JTAG, oscilloscopes, logic analyzers

Familiarity with Git and CI/CD workflows

Preferred Experience

Telecom: BTS integration, site monitoring, hybrid energy systems

4G/5G modems, AT commands, dual-SIM failover logic

SNMP MIB development and NMS integration

Power/thermal management at firmware level

Remote configuration, diagnostics, and FOTA

Security: encrypted boot, TLS, credential management

Soft Skills

• Critical thinking and attention to detail
• Strong communication skills (written and verbal)
• Ability to work independently and within cross-functional teams
• Thrives in fast-paced, field-tested environments

Job Type: Full-time

Pay: Php100, Php125,000.00 per month

Work Location: In person

Responsibilities:

Develop and debug firmware for MCUs (e.g., ARM Cortex, ESP32)

Implement protocols: Modbus, SNMP, MQTT, HTTP/HTTPS, REST APIs

Interface with hardware via UART, RS485, I2C, SPI, CAN, Ethernet

Build failover logic, watchdogs, low-power modes, and OTA updates

Collaborate on board bring-up and system validation

Manage SNMP MIBs, telemetry, and remote config tools

Ensure telecom compliance and embedded security standards

Required Skills and Qualifications:

Bachelor's degree in Electronics, Communications, or Computer Engineering

3+ years of experience in embedded firmware development (C/C++)

Proficiency with firmware development for ARM Cortex, ESP32, or similar MCUs

Deep knowledge of embedded communication protocols: Modbus, SNMP, MQTT, TCP/IP, and serial interfaces

Experience with RTOS (FreeRTOS, Zephyr) and bare-metal systems

Strong debugging and troubleshooting skills using JTAG, logic analyzers, oscilloscopes

Familiarity with Git and embedded CI/CD workflows

Job Type: Full-time

Pay: Php40, Php80,000.00 per month

Benefits:

• Opportunities for promotion

Work Location: In person

We are looking for an IoT/STEM Engineer (Associate) to join our engineering team. This role focuses on hands-on assembly, programming, testing, troubleshooting, and documentation of IoT and STEM systems. You will work closely with our Lead Engineer to bring projects from concept to deployment and ensure high-quality support for both our education and industry clients.

This position is ideal for candidates with 1–2 years of experience in electronics/IoT who loves to build, test, and solve problems in real-world applications.

• 1–2 years of experience in electronics, IoT, embedded systems, or related fields.
• Good knowledge of any of the following: Arduino, ESP32, Raspberry Pi, or sensors/actuators integration (hardware + firmware).
• Hands-on experience in electronics assembly, soldering, wiring, and testing.
• Basic programming (Arduino IDE, C/C++, Python) knowledge. Programming experience in deployed projects is a plus.
• Familiarity with wireless comms (WiFi, BLE, LoRaWAN, MQTT, RFID, etc.) is a plus.
• Comfortable creating documentation, photos, and short demo videos for technical projects.
• Team player with willingness to support training and technical needs of clients.

1. Assembly & Testing

2. Assemble and configure IoT/automation devices, STEM kits, and DIY modules.

3. Perform unit and system-level testing, verification, and debugging.
4. Conduct field deployment testing as needed.

2.Troubleshooting & Support

• Diagnose and resolve technical issues reported by Store customers.
• Provide primary-level technical support to clients and escalate to Lead Engineer if needed.

• Assist trainees and help train customers on kit usage or product setup.

• Project Integrations

• Collaborate with the Lead Engineer and R&D team for pilot hardware and software development.

• Support the configuration, setup, and testing of IoT sensors, gateways, and dashboards.
• Implement updates and improvements for existing IoT/STEM systems.

• Assist Sales/Admin team with technical queries about products.

• Documentation & Content

• Create and maintain technical documentation (user guides, wiring diagrams, internal manuals)

• Document marketing-ready content (product photos, demo videos, blog post)

• Work on exciting IoT and STEM education projects that impact schools and industries.
• Gain mentorship from our R&D team and grow your skills in real-world IoT deployment.
• Be part of a fast-growing ecosystem in tech education and IoT in the Philippines.
• Opportunity to contribute both to engineering projects and STEM education advocacy.

We are looking for an innovative IoT / Automation Engineer to design, develop, and implement smart home and building automation solutions. This role involves creating system designs, integrating various IoT devices (including smart locks, lighting, climate control, security systems, and sensors), and ensuring reliable and user-friendly automation experiences for our clients.

Key Responsibilities

• Design and develop automation systems using a variety of smart and IoT devices.
• Create system diagrams, wiring plans, and device specifications based on project requirements.
• Integrate and configure devices such as smart locks, sensors, lighting controls, climate systems, and security components.
• Set up and optimize device communication through local networks and IoT protocols.
• Perform system testing, troubleshooting, and performance optimization.
• Collaborate with technicians, suppliers, and project teams to ensure smooth implementation.
• Document system configurations, schematics, and technical procedures.
• Provide technical support, training, and guidance to internal staff and end-users.
• Keep up to date with emerging smart technologies and best practices.

Qualifications

• Bachelor's degree in Electrical, Electronics, Computer, or Mechanical Engineering (or related field).
• Experience in IoT, automation, or smart system integration.
• Knowledge of smart lock systems, low-voltage wiring, and electronic controls.
• Familiar with communication protocols (Zigbee, Z-Wave, Wi-Fi, Bluetooth, MQTT, Thread, Matter).
• Basic networking knowledge (routers, switches, IP addressing).
• Strong problem-solving, documentation, and project management skills.
• Good teamwork and communication skills.
• Willing to do field work and travel to various sites.

Job Types: Part-time, Fresh graduate

Pay: Php15, Php20,000.00 per month

Expected hours: 15 per week

Benefits:

• Flexible schedule
• Flextime
• Work from home

Work Location: In person

Who we are looking for?

An Product Engineer with in-depth experience in technical support within the SaaS industry who has experience on API and IoT integration on software and hardware.

Responsibilities

• Take ownership of projects requiring custom solutions and collaborating with relevant stakeholders.
• Identifying customer requirements and gathering all relevant details from stakeholders, data sources and suppliers to determine the feasibility of the project.
• Meet with suppliers to design and source custom products to meet customer requirements.
• Perform product testing and validation to ensure that the custom solution is reliable, compliant to the necessary standards and meets the customers' expectations.
• Lead all CANBUS related work and projects to ensure that CAN data is reversed, captured, and maintained correctly.
• Provide after-sales support to customers to assist with any technical or product related issues after project completion.

Requirements

• Bachelor's degree in Engineering or a related field; Master's degree is a plus.
• Proven experience in product engineering, project management, and working with custom solutions.
• Strong proficiency in vehicle electronics, and integration.
• Excellent problem-solving skills and a track record of delivering high-quality solutions under tight deadlines.
• Effective communication and interpersonal skills to collaborate with cross-functional teams, suppliers, and customers.
• Ability to adapt to changing project priorities and navigate complex technical challenges.
• Leadership qualities with the ability to guide and mentor junior team members.
• Familiarity with wiring diagrams, circuit diagrams and technical drawings.
• Strong organizational skills and the capability to manage multiple projects simultaneously.

• Modifies Design of Component & Assembly Level 3D CAD Models
• Participates in Design Review / Drawing Review / DR Review activities
• Learns and performs Tolerance Analysis of low complexity-assemblies
• Identifies Design or technical problems, either potential or a result of testing and evaluation
• Contributes Design Concepts
• Performs Product Testing and Evaluation to ensure compliance with Product Standards
• Ensures proper maintenance / documentation of CAD files using PDMLink and Merlin
• Performs Parts Testing and Evaluation to ensure compliance with Parts Standards
• Prepares Evaluation, Test & Analysis Reports after performing evaluation and testing activities

Required Skills, Experience & Education:

• BS Degree in Mechanical Engineering or Mechatronics Engineering (Electromechanical Engineering)
• With 3 - 5 years relevant or related experience in 3D CAD (Preferably Pro/Engineer (Creo)), documentation, design, development, and analysis.
• Good problem solving and analytical skills
• Good verbal and written communication skills
• Intermediate knowledge in Microsoft Office Tools
• Works with less supervision

Desired Skills and Work Experience:

• Intermediate knowledge in mechanical design and evaluation
• Intermediate knowledge on sheet metal OR plastic design
• Intermediate knowledge on testing and instrumentation
• Intermediate DFX skills: component & assemblies
• Intermediate knowledge on product development processes
• Intermediate knowledge on technical documentation content (component & assembly level) and tools
• Intermediate proficiency in design-aid tools
• Intermediate troubleshooting skills

About NCR Atleos

NCR Atleos, headquartered in Atlanta, is a leader in expanding financial access. Our dedicated 20,000 employees optimize the branch, improve operational efficiency and maximize self-service availability for financial institutions and retailers across the globe.

About NCR Atleos

NCR Atleos, headquartered in Atlanta, is a leader in expanding financial access. Our dedicated 20,000 employees optimize the branch, improve operational efficiency and maximize self-service availability for financial institutions and retailers across the globe.

• Modifies Design of Component & Assembly Level 3D CAD Models
• Participates in Design Review / Drawing Review / DR Review activities
• Learns and performs Tolerance Analysis of low complexity-assemblies
• Identifies Design or technical problems, either potential or a result of testing and evaluation
• Contributes Design Concepts
• Performs Product Testing and Evaluation to ensure compliance with Product Standards
• Ensures proper maintenance / documentation of CAD files using PDMLink and Merlin
• Performs Parts Testing and Evaluation to ensure compliance with Parts Standards
• Prepares Evaluation, Test & Analysis Reports after performing evaluation and testing activities

Required Skills, Experience & Education:

• BS Degree in Mechanical Engineering or Mechatronics Engineering (Electromechanical Engineering)
• With 3 - 5 years relevant or related experience in 3D CAD (Preferably Pro/Engineer (Creo)), documentation, design, development, and analysis.
• Good problem solving and analytical skills
• Good verbal and written communication skills
• Intermediate knowledge in Microsoft Office Tools
• Works with less supervision

Desired Skills and Work Experience:

• Intermediate knowledge in mechanical design and evaluation
• Intermediate knowledge on sheet metal OR plastic design
• Intermediate knowledge on testing and instrumentation
• Intermediate DFX skills: component & assemblies
• Intermediate knowledge on product development processes
• Intermediate knowledge on technical documentation content (component & assembly level) and tools
• Intermediate proficiency in design-aid tools
• Intermediate troubleshooting skills

Offers of employment are conditional upon passage of screening criteria applicable to the job.

EEO Statement

NCR Atleos is an equal-opportunity employer. It is NCR Atleos policy to hire, train, promote, and pay associates based on their job-related qualifications, ability, and performance, without regard to race, color, creed, religion, national origin, citizenship status, sex, sexual orientation, gender identity/expression, pregnancy, marital status, age, mental or physical disability, genetic information, medical condition, military or veteran status, or any other factor protected by law.

Statement to Third Party Agencies

To ALL recruitment agencies: NCR Atleos only accepts resumes from agencies on the NCR Atleos preferred supplier list. Please do not forward resumes to our applicant tracking system, NCR Atleos employees, or any NCR Atleos facility. NCR Atleos is not responsible for any fees or charges associated with unsolicited resumes.